PRISONS

CAPFIT 50

TAUT WIRE MECHANICAL DETECTION FENCE

CapFiT 50 is an innovative and smart perimeter protection solution that detects any intrusion while eliminating false alarms. This concept consists of a wall of taut wires combined with a crush sensor inserted into a detection post. The latter continuously analyses relative variations in movement between the taut wires.

Any attempt to pull apart, cut or lean on it is then detected. Using the differential principle, CapFiT 50 is totally insensitive to ground movement and temperature distortions.
This innovative solution can be installed on an existing fence, wall, overhang or as a freestanding structure.
Robust, simple to deploy (little civil engineering and energy input), streamlined design, customer return on investment, are some of the benefits that make CapFiT 50 an effective solution for the professional security market.

Main features :

• Excellent detection quality.
• Very low number of false alarms: about 1 alarm / km / year.
• Can be adapted to all types of fences.
• Totally unaffected by bad weather (rain, wind, snow, fog, extreme temperatures) and ground movement.
• Easy to install and maintain (only 1 connector per post).
• Very long lifespan.
• Low electrical consumption.
• Optional: real time alarm management with a supervision system or remote monitoring centre.
• Available in the following versions: 1.00 m, 1.50 m, 2.00 m, 2.50 m, 3.00 m, overhang (0.80 m), customised.

ANACONDA

WIRE-WALL ELECRTRIFIED FENCE

The ANACONDA fence has a stainless-steel profile, which makes it possible to hold insulators, which creates a wall of electrified and detecting taut wires.
This aesthetic and discreet system can be installed as a freestanding structure or fitted to an existing fence. Its innovative design makes it compatible with most standard fences on the market, and makes it possible to electrify an existing fence or transform it into a detective fence at a lower cost.

• JAGUAR 400: Electrified fence with capacitive detection of the touch
•  COUGAR 400: Electrified fence which detects cutting
• LYNX 400: Capacitive detection of the touch fence

Main features:

• Effective and discreet system.
• Installation on existing fence or as a freestanding structure.
• Easy installation on all profiles.
• Good mechanical performance in severe weather conditions.
• Good electrical insulation for use with pulse-type high-voltage.
• Option to keep wire fencing and insulators on the same post.
• JAGUAR 400
• COUGAR 400
• LYNX 400

JAGUAR 400

FENCE ENERGISER WITH CAPACITIVE OF THE TOUCH

The JAGUAR 400 energiser, combined with a network of conductive cablets, makes it possible to have a perimeter protection system combining a deterrent, repellent and delaying effect.
This original solution combines the generation of two different electrical signals on the same wire.
The first one – a 10,000 volt high-voltage pulse type – acts as a deterrent. The second one – a very low-voltage type – provides very sensitive detection of human contact with the fence.
It has the advantage of providing effective and permanent detection of the touch.
The JAGUAR 400 energiser complies with the EN-60335-2-76 standard ensuring the safety of people.

Main features:

• 10,000 volts high voltage signal.
• Effective and permanent capacitive touch detection on all wires.
• Deterrent, repellent and delaying effect.
• Very few false alarms.
• Not really affected by weather conditions such as wind, rain, fog, lightning, etc.
• Option to deactivate High-Voltage electrification.
• High-voltage synchronisation for multiple zones.
• Dry contact or JBUS standard protocol communication.
• Battery-backed power option with temperature load compensation.

COUGAR 400 

FENCE ENERGISER WITH CUT DECISION

The COUGAR 400 energiser, combined with a network of conductive cablets, makes it possible to obtain a perimeter protection system combining a deterrent, repellent and delaying effect.
The 10,000 Volt High Voltage signal also makes it possible to detect cutting of cablets.
The COUGAR 400 energiser complies with the EN-60335-2-76 standard ensuring the safety of people.

Main features:

• 10,000 volts high voltage signal.
• Very few false alarms.
• Deterrent, repellent and delaying effect.
• Not really affected by weather conditions such as wind, rain, fog, lightning, etc.
• Option to deactivate High Voltage electrification.
• High-voltage synchronisation for multiple zones.
• Dry contact or JBUS standard protocol communication.
• Battery-backed power option with temperature load compensation.

LYNX 400

SENSOR DEVICE WITH CAPACITIVE DETECTION OF THE TOUCH

The LYNX 400 capacitive detection of the touch unit combined with a network of conductive cablets, makes it possible to have a perimeter protection fence which detects cutting and short-circuits, but also touch, with its touch capacitive technology.
The LYNX 400 touch detection unit complies with the EN 60950-1 standard ensuring the safety of people.

Main features:

• Effective and permanent capacitive touch detection on all wires.
• Deterrent effect.
• Very few false alarms.
• Not really affected by weather conditions such as wind, rain, fog, lightning, etc.
• Dry contact or JBUS standard protocol communication.

HERMINE

MICROWAVE BARRIERS

A low power microwave energy beam is generated between a microwave transmitter and a microwave receiver both located about 1m from the ground.

HERMINE barriers detect amplitude variations in the electromagnetic field triggered by an intruder within the volumetric detection zone.

The detection range is comparable to a wall which is 2-3m thick and 3-4m high, over a length which can be up to 200m between the transmitter and the receiver.

Main features:

• Excellent detection quality
• Excellent detection/number of false alarms ratio
• Operation especially suited to difficult weather conditions, and in particular not affected by fog
• Easy to install and set
• Configuration via Ethernet connection, on a secure web page
• Switch to dry contact or bus system alarms
• New single-piece injection-molded design, ensuring improved waterproofing performance
• Fully compatible with the features of previous generations (Hermès 150-B and Hermès 300), ensuring easy replacement.