AIRPORT / PORT

CAPFIT 50

TAUT WIRE MECHANICAL DETECTION FENCE

CapFiT 50 is an innovative and smart perimeter protection solution that detects any intrusion while eliminating false alarms. This concept consists of a wall of taut wires combined with a crush sensor inserted into a detection post. The latter continuously analyses relative variations in movement between the taut wires.

Any attempt to pull apart, cut or lean on it is then detected. Using the differential principle, CapFiT 50 is totally insensitive to ground movement and temperature distortions.
This innovative solution can be installed on an existing fence, wall, overhang or as a freestanding structure.
Robust, simple to deploy (little civil engineering and energy input), streamlined design, customer return on investment, are some of the benefits that make CapFiT 50 an effective solution for the professional security market.

Main features:

• Excellent detection quality.
• Very low number of false alarms: about 1 alarm / km / year.
• Can be adapted to all types of fences.
• Totally unaffected by bad weather (rain, wind, snow, fog, extreme temperatures) and ground movement.
• Easy to install and maintain. (only 1 connector per post)
• Very long lifespan.
• Low electrical consumption.
• Optional: real time alarm management with a supervision system or remote monitoring centre.
• Available in the following versions: 1.00 m, 1.50 m, 2.00 m, 2.50 m, 3.00 m, overhang (0.80 m), customised.

ANACONDA

WIRE-WALL ELECTRIFIED FENCE

The ANACONDA fence has a stainless-steel profile, which makes it possible to hold insulators, which creates a wall of electrified and detecting taut wires.
This aesthetic and discreet system can be installed as a freestanding structure or fitted to an existing fence. Its innovative design makes it compatible with most standard fences on the market, and makes it possible to electrify an existing fence or transform it into a detective fence at a lower cost.

• JAGUAR 400: Electrified fence with capacitive detection of the touch
• COUGAR 400: Electrified fence which detects cutting
• LYNX 400: Capacitive detection of the touch fence

Main features:

• Effective and discreet system
• Installation on existing fence or as a freestanding structure
• Easy installation on all profiles
• Good mechanical performance in severe weather conditions
• Good electrical insulation for use with pulse-type high-voltage
• Option to keep wire fencing and insulators on the same post
• JAGUAR 400
• COUGAR 400
• LYNX 400

JAGUAR 400

FENCE ENERGISER WITH CAPACITIVE DETECTION OF THE TOUCH

The JAGUAR 400 energiser, combined with a network of conductive cablets, makes it possible to have a perimeter protection system combining a deterrent, repellent and delaying effect.

This original solution combines the generation of two different electrical signals on the same wire.

The first one – a 10,000 volt high-voltage pulse type – acts as a deterrent. The second one – a very low-voltage type – provides very sensitive detection of human contact with the fence.
It has the advantage of providing effective and permanent detection of the touch.
The JAGUAR 400 energiser complies with the EN-60335-2-76 standard ensuring the safety of people.

Main features:

• 10,000 volts high voltage signal
• Effective and permanent capacitive touch detection on all wires
• Deterrent, repellent and delaying effect
• Very few false alarms
• Not really affected by weather conditions such as wind, rain, fog, lightning, etc.
• Option to deactivate High-Voltage electrification
• High-voltage synchronisation for multiple zones
• Dry contact or JBUS standard protocol communication
• Battery-backed power option with temperature load compensation

COUGAR 400 

FENCE ENERGISER CUT DETECTION

The COUGAR 400 energiser, combined with a network of conductive cablets, makes it possible to obtain a perimeter protection system combining a deterrent, repellent and delaying effect.
The 10,000 Volt High Voltage signal also makes it possible to detect cutting of cablets.

The COUGAR 400 energiser complies with the EN-60335-2-76 standard ensuring the safety of people.

Main features:

• 10,000 volts high voltage signal
• Deterrent, repellent and delaying effect
• Very few false alarms
• Not really affected by weather conditions such as wind, rain, fog, lightning, etc.
• Option to deactivate High Voltage electrification
• High-voltage synchronisation for multiple zones
• Dry contact or JBUS standard protocol communication
• Battery-backed power option with temperature load compensation

LYNX 400

SENSOR DEVICE WITH CAPACITIVE DETECTION OF THE TOUCH 

The LYNX 400 capacitive detection of the touch unit combined with a network of conductive cablets, makes it possible to have a perimeter protection fence which detects cutting and short-circuits, but also touch, with its touch capacitive technology.

The LYNX 400 touch detection unit complies with the EN 60950-1 standard ensuring the safety of people.

Main features:

• Effective and permanent capacitive touch detection on all wires
• Deterrent effect
• Very few false alarms
• Not really affected by weather conditions such as wind, rain, fog, lightning, etc.
• Dry contact or JBUS standard protocol communication

MYGALE 4S+

DÉTECTEUR À CÂBLE PIEZO-ELECTRIQUE

Mygale 4S + est un capteur d’extérieur qui permet de récupérer et d’analyser les vibrations d’une clôture lors d’une intrusion. Il est composé d’une unité d’acquisition locale, qui peut gérer jusqu’à 4 segments de 150 m de câble piézoélectrique.
Les vibrations provoquées par un individu qui tente de cisailler, grimper ou soulever la clôture sont détectées et transmises à l’unité d’acquisition locale. Celle-ci effectue les traitements nécessaires pour l’analyse des mesures et la génération de l’alarme.
La mise en réseau les capteurs permet un déploiement linéaire sur une grande distance d’un système de détection qui allie efficacité, discrétion et sectorisation de l’alarme.

Principales caractéristiques :

• Excellente qualité de détection
• Solution économique et fiable
• Facilité d’installation et de réglage (Bluetooth, RS)
• Technologie simple et robuste
• Sensibilisé ajustable par secteur
• Rapatriement des alarmes en contacts secs ou en bus RS485

Eryvision

SYSTÈME DE SUPERVISION

Eryvision est issu de plusieurs générations de systèmes de centralisation d’alarmes, déployés plusieurs centaines de fois en France et à l’export. Il permet la supervision et l’interaction entre les systèmes de sûreté via un poste de contrôle unique.
Eryvision est un système de supervision pérenne, ergonomique et évolutif, capable d’intégrer de nombreuses applications du marché, par le développement de passerelles.

L’IHM graphique avec la mise à disposition des informations synthétiques permet une exploitation intuitive, une visualisation et une analyse globale de situation en temps réel.

Principales caractéristiques :

• Supervision et interactions des sous-systèmes de sécurité 
  • Capteurs SERPE
  • Centrale d’alarme d’intrusion – Capteurs périmétriques
  • Vidéosurveillance (asservissement de la vidéo
    sur évènement)
  • Contrôle d’accès – Système de protection des personnes
  • Brouilleur GSM
• Outil d’exploitation ergonomique et simple d’utilisation : IHM configurable
• Architecture modulaire et évolutive
• Surveillance des équipements sur réseau, en temps réel
• Surveillance des logiciels WINDOWS (services, processus)

• Garantie de maintien en conditions opérationnelles des serveurs : Redondance à chaud, rechargement configuration à chaud
• Asservissements d’actions déclenchées sur événement, sur plage horaire ou manuellement
• Transmission alarmes vers télésurveillance
• Transmission alarmes vers autre superviseur (ModBus, messages TCP)
• Toute la configuration de la supervision ne nécessite aucune compétence de programmation